Book a call

How to start an electrician business: the license, the insurance and what it costs to find out

Your state’s license rule with one state shown in full, the insurance that rule asks for, and a way to add up your own start-up cost before you buy a truck.

An electrician in a hard hat checking an open breaker panel on a garage wall, with a work van parked in the driveway outside

How to start an electrician business depends first on the state you work in, because the license decides who may do the work and who may sell it. You already know the trade. Ahead: the license rule, registering the business and getting a tax ID, insurance, what one owner actually spent to start and how to total your own figure, and where the first jobs come from.

Start with your state’s license rule

No single license list covers the country. SBA’s advice is “You’ll have to research your own state, county, and city regulations. Industry requirements often vary by state. Visit your Secretary of State’s website to find out which permits and licenses you need.” For an electrician, the state’s electrical licensing board is the page to read first.

Texas shows what one state’s rule looks like. The Texas Department of Licensing and Regulation (TDLR) says on its electricians page: “Anyone who performs, or offers to perform, non-exempt electrical work in the state of Texas must be licensed and perform that work through a licensed electrical contractor.” The electrical contractor license page sets the condition for the business itself: “You must employ a licensed Master Electrician to apply for an Electrical Contractor license. The Master Electrician may also be the business owner.” It adds one limit: “A Master Electrician may only be assigned to a single Electrical Contractor, unless the Master Electrician owns more than 50 percent of the electrical contracting business.” The application carries a “non-refundable $110 application fee”, and “Electrician licenses are valid for one year from the date of issuance and must be renewed annually.”

So in Texas the question is who the Master Electrician is. The Master Electrician license page says: “To apply for a Master Electrician license, you must have held Journeyman Electrician license for at least two years.” It also says “You must also be able to show that you have completed 12,000 hours of on-the-job training under the supervision of a Master Electrician licensed in Texas.” Other states have their own boards, their own license names and their own experience rules, and this page does not cover them. Read your own state’s contractor page itself, not a summary of it.

Register the business and get a tax ID

Choose a legal structure next, since the choice shapes your taxes and what you personally owe if a job goes wrong. SBA’s launch guide says “Your business structure affects how much you pay in taxes, your ability to raise money, the paperwork you need to file, and your personal liability.” If you take jobs and register nothing, you are a sole proprietor, and SBA says the owner can then be held personally liable for the business’s debts. SBA says LLCs protect you from personal liability in most instances. Ask an accountant or attorney which one suits your state.

Then apply for the federal tax ID. SBA says “It’s free to apply for an EIN, and you should do it right after you register your business.”

Insurance your license may ask for

In Texas, the contractor license page names the minimums. “Electrical contractors must maintain the required limits of business liability insurance”, and the page lists “Minimum $300,000 per occurrence (combined for property damage and bodily injury)”, “Minimum $600,000 aggregate (total amount the policy will pay for property damage and bodily injury coverage)” and “Minimum $300,000 aggregate for products and completed operation”. For workers’ compensation, the application needs proof of that insurance, a certificate of authority to self-insure, or a statement that you have elected not to obtain it. The page adds: “If you elect to not provide workers' compensation insurance, you must file an online notice of no coverage with the Texas Department of Insurance.” These are Texas figures. Your state may ask for different limits or none.

Beyond what the law requires, SBA’s rule of thumb is “As a general rule, you should insure against things you wouldn’t be able to pay for on your own.” Ask more than one agent for a quote before you pick a policy.

What it costs: one electrician’s start, then your own total

SBA names what moves the total: “Costs that can vary significantly by location include standard salaries, minimum wage laws, property values, rental rates, business insurance rates, utilities, and government licenses and fees.” So instead of an average, here is one electrician’s real start.

In UpFlip’s case study of an electrical business, Joel Walsman “started Jefferson Electric in 2009 after the master electrician he trained under retired.” UpFlip says the start was “with just $15K, a pickup truck, and some basic tools.” Walsman told UpFlip: “First year I made $9K. I had to start charging properly. It took about 2.5 years to recoup. I acted like a handyman at first. My default answer was yes, but it hurt my income because it drastically increased my expenses.” That is one shop, and it is not a rule for yours.

To build your own total, give each of these its own line, and write a quote you were actually given beside it:

  • License, registration and insurance fees, from your state board’s own site and from at least two insurance agents
  • Rent or workspace, after you check local zoning for a shop or a yard
  • A work vehicle and the tools you do not own yet, each from a real seller
  • Materials for your first jobs, from your supplier’s price list
  • Your own pay, and any hired electrician’s, to cover the months until the work pays them

Joel Walsman’s first year points at the final line. The earlier four show what goes out, and that last one shows how long you can last while the first panel and service upgrade jobs come in.

Price jobs in writing from the first call

Walsman’s “I had to start charging properly” is the lesson to take before the first job. Our guide on how to quote electrical jobs over the phone covers what to tell a caller who asks for a price. Put the price on paper too: the electrical estimate template gives you a free form with a reason for every line.

Where the first customers come from

With no regulars on your books, the first jobs come from people who already know you and from people searching for an electrician nearby. Our list of electrician marketing ideas that bring calls covers what to try first, and our guide to paying for electrical leads covers what to know before you buy any. The electrician answering service guides cover the calls that arrive while you are in a panel.

Starting an electrician business comes to four setups: your state’s license, a registered business with a tax ID, the insurance the license asks for, and a budget built from your own quotes. When the phone does start ringing while you are on a job, SvarKlar answers calls and messages for your shop while you work, texts back a caller you missed, and replies in your voice. Every reply is checked by a person until it gets them right, and that person is you or Frederik. It does not run ads, create demand or guarantee bookings. What an AI receptionist does is explained on its own page, and AI receptionist pricing has another.

Find your state’s electrical license board this week, read its contractor page, and get two insurance quotes before you buy a truck.

Curious how SvarKlar would handle your first callers? Book a call, or look at how the service works.

Next step

A call walks through what happens at your shop when a customer rings and you are up a ladder.

How these guides are made