Book a call

Electrical estimate template: free PDF and Word, with a reason for every line

A blank page you can print or type into, for a service call, a new circuit or a panel job.

An electrician holding a clipboard beside an open electrical panel in a hallway while a homeowner looks on

Maybe you only want an electrical estimate template, with no account to open and no address to hand over. Both files above download as they are. Drop in your logo and print the PDF for the truck, or type straight into the Word file and send it.

Looking for an electrician quote template? It is this sheet. The line “Price is (fixed or estimate)” is where you tell the customer which one they hold.

This page and its files are general information, not legal advice. Laws differ by state and change, so check your own state’s current rules before you use the form. Terms for free content.

Every line of the sheet, and why it is there

Read across: the line, what you put on it, and our reason. The reasons come from how jobs go, not from law. This page names no state rule, and a section further down says why.

FieldOn the lineWhy it is there
Company
Company name, phone, addressYour details, or a logo in the top boxWhoever holds the page knows who wrote it and which number reaches you.
License numberYour electrical license numberA customer can check who is licensed for the work. Whether your state wants it printed on an estimate is for your licensing board to say.
Estimate numberAny numbering you likeOn a call, you and the customer can point at the same sheet.
DateThe day you wrote itMaterial prices move, and the date shows which ones you used.
Customer and job
Customer name, phone, emailWhoever approves the workIt records who agreed and how to reach them with a question.
Job addressWhere the work happensIt can differ from the customer’s own address, as with a rental or a parent’s house, and the crew needs the right door.
What the customer asked forTwo lines, in the customer’s own wordsThe price stays tied to the request. If someone later says they thought a thing was included, their own words are on the page.
Materials, labor and extras
Qty, item, brand and ratingFor example, 1, a 20 amp GFCI outlet, and the brandThe customer sees what goes into the wall. The rating, such as amps, separates the right part from a look-alike.
Who supplies itYou, or the customerA fixture or charger the customer bought is marked as theirs, and only its installation is priced.
Unit price, line totalPrice each, then quantity times priceEach part can be checked, and a change in price touches one line.
Labor linesThe task, hours, rate and line totalOne line per task shows the customer what the hours buy. It shows you which tasks you under-priced once the job is over.
Optional extrasThe extra, its price, and a box for the customer to tickThe base price stays clean. Surge protection or a second circuit is a choice the customer makes.
Fees, tax and total
Materials total, labor totalThe two sumsAnyone can add the lines above and see if the total is right.
Permit and inspection feesThe amount, or “none”Ask your local permit office whether the job needs a permit. A fee missing from the sheet comes out of your own pocket.
Service call chargeWhat you charge for the visit, if anythingComing out is one thing and doing the work is another, so each has its own line.
Sales taxTax on the jobThe customer meets no extra number at the end. Ask your state’s tax agency which parts of an electrical job are taxed.
TotalThe figure the customer says yes toA single number to agree on, and the one a later invoice gets measured against.
Price is (fixed or estimate)One word“Fixed” tells the customer the number holds. “Estimate” tells them it can move, and the Terms line says what moves it.
Deposit asked, balance after depositAn amount, or blankWhat is due before you start is agreed on paper, not argued at the door.
Terms and approval
Estimate good untilA datePast that day, wire and breaker prices may have changed.
Work starts and ends aboutTwo datesThe customer can plan around the days the power is off.
WarrantyWhat is covered and for how longPut on paper ahead of the job, so nobody has to recall it later.
Not included, and what can change the priceFor example, patching and painting after a wall is opened, or a panel that does not match what you were toldAn electrical job can turn up a surprise once a cover comes off. The line says what you do then: stop, give the new price, and wait for the customer’s yes.
Payment methodCard, check, cash or otherChosen at the start, not at the end of a long day.
Customer signature, dateUnder the printed approval sentenceIt proves the customer accepted this price before any work began.

Hand the customer their own copy when they sign. A signed page that only you hold settles nothing for them.

Filling it in for three common jobs

The same form fits different jobs. What changes is which lines you lean on.

A fault you have not found yet. The cause decides the price, so write “Estimate” on the price line. Use the service call charge for the visit, labor by the hour for the search, and put “parts depend on the cause” under what can change the price. The customer approves the visit and the search, and you come back with a second form once you know what is wrong. Our guide on how to quote electrical jobs over the phone explains why this kind of job needs a look first.

A new circuit or a charger. Here the materials table does the work. Write the wire, the breaker and the outlet with their ratings. If the customer bought the charger, mark it as theirs and price only the installation. Add the permit and inspection line, and write “Fixed” if you can stand behind the number.

Panel work. Treat the permit and inspection fees as a line you fill in on every panel estimate, even when the answer is “none”. Under not included, write what happens if the existing wiring is not what you expected: you stop, you tell the customer, and the new price needs a new yes. The approval sentence at the bottom of the form already says the customer decides.

What this template adds

A bare form gives you room for work and a sum. This sheet pushes further in four places. Each material says who supplies it, so a part the customer bought never slips into your price. Optional extras stay out of the total until the customer ticks them. You must write whether the price is fixed or an estimate. And what can change the price is on the paper before the work, where you both see it.

What this template does not cover

It names no state rule. We looked for a state statute on what an electrical estimate must contain, at the state’s own site, and found nothing we could read and quote with confidence, so we say nothing about what your state requires. License number display, permits, what must be in writing and when a customer can cancel are set by your state licensing board and your local permit office. Ask them before you rely on this form, and add any line they require.

When the estimate request comes in while you are up a ladder

The sheet helps once you stand in the customer’s hallway. The loss comes before that. A homeowner rings for an estimate while you are in an attic or on a roof, gets voicemail, and dials the next electrician. Return that call in the evening and the estimate is already late, or lost. What missed calls really cost puts numbers on the lost job, and why homeowners give up shows how fast a caller moves on. AI receptionist pricing shows what covering the phone costs.

When a call goes unanswered, SvarKlar’s missed call text back texts the caller within seconds. It asks what the job is and where, the same facts as the top of the sheet, and passes you the thread with those already collected. You still write the estimate. If you want it to, it can quote a set-price job from your own price list, and it never prices anything that is not on that list.

When a caller describes sparks, smoke or a burning smell, the first reply tells them to move to a safe place and call 911, before any question about the job. You set those emergency rules once. The guide on after-hours electrical calls shows the wording. For the wider picture, see our electrician answering service guide.

Save the sheet, add your logo, and use it on your next estimate before the panel cover comes off.

Curious how SvarKlar would handle the callers who ask for a price? Book a call or see the home page.

Next step

A call covers what happens at your company when someone asks for an estimate and nobody picks up. $295 a month. Setup is free, and you can cancel any time.

How these guides are made